Heat pumps and hot or cold water hydronic connections
Eurotis systems for heat pumps and hot or cold water hydronic connections are based on:
- EUROKLIMA corrugated pliable PLT-CSST tubes in AISI 304 (designation: 1.4301 – X5CrNi18-10) austenitic stainless steel with minimum thickness of 0,3 mm with micro-cell molecular structure coating (13 mm) specially designed and tested for heat pump applications, ensuring reliable and long-lasting performance
- Brass fittings studied and realized by Eurotis to make the installation easier and assure the tightness of the system: press fitting system ePRESS Technolgy, flanging system and XL flanging system
- Tightness elements (gaskets) suitable for domestic water.
- Black heat-shrink sheath for the protection of the insulating coating in case of outdoor installations..
Products:
EUROKLIMA PLT-CSST TUBES
ePRESS system
Male brass press-fittings with EDPM gasket suitable for drinking water
Female brass press-fittings with EDPM gasket suitable for drinking water
Brass press-fittings with swivel end with EDPM gasket suitable for drinking water
Nipple/coupline brass press-fittings with EDPM gasket suitable for drinking water
Reduced nipple/coupline brass press-fittings with EDPM gasket suitable for drinking water
Brass Tee press-fittings with EDPM gasket suitable for drinking water
Reduced brass Tee press-fittings with EDPM gasket suitable for drinking water
Flanging system
Nickel plated brass nuts with special seat and ISO 228 G female
Brass junction simple screws
Nickel plated brass nuts with special seat and ISO 228 G female thread with synthetic fibers based KLINGERSIL C4324
Nickel plated brass nuts with special seat and ISO 228 G female thread with NBR plane gaskets
Nickel plated brass reduced nuts with special seat and ISO 228 G female thread with arammidic fibers based CENTELLEN WS 3820 plane gaskets
Reduced nickel plated brass nuts with special seat and ISO 228 G female thread with NBR plane gaskets for gas
Nickel plated brass M/M nipples with double ISO 228 G male thread with plane end
Brass M/M nipples with double ISO 228 G male thread with plane end
Nickel plated brass M/M nipples with double ISO 228 G male thread with plane end (A) and EN 10226 R male taper thread (B)
Brass M/M nipples with double ISO 228 G male thread with plane (A) end and EN 10226 R male taper thread (B)
Nickel plated brass M/F nipples with ISO 228 G male thread with plane end and EN 10226 Rp female thread
Brass M/F nipples with ISO 228 G male thread with plane end and EN 10226 Rp female thread.
Brass M/M reduced nipples with double ISO 228 G male thread with plane end (A-B)
Brass M/M reduced nipples with ISO 228 G male thread with plane end (B) and EN 10226 R male taper thread (A)
Brass M/F reduced nipples with ISO 228 G male thread with plane end (A) and EN 10226 Rp female thread (B)
Brass M/F reduced nipples with ISO 228 G male thread with plane end and EN 10226 Rp female thread
Brass M/M fittings for junction between flanged PLT-CSST tubes and copper tubes ends
Brass M/M/M tee with ISO 228 G male threads (A-B-C)
Nickel plated brass M/M/M tee with ISO 228 G male threads (A-B-C)
Nickel plated brass two ways linear manifolds with ISO 228 G male threads
Nickel plated brass three ways linear manifolds with ISO 228 G male threads
Nickel plated brass 90° M/F elbows with a ISO 228 G male thread with plane end (A) and a ISO 228 G female thread (B)
Nickel plated brass 90° elbows with ISO 228 G male thread with plane end (A) and ISO 228 G male thread with seat for De14 copper tube (B)
Nickel plated brass M/F wall elbows with ISO 228 G male thread with plane end (B) and ISO 228 G female thread
XL flanging system
Brass nuts with special seat and ISO 228 G female thread without gaskets
Reduced brass nuts with special seat and ISO 228 G female thread
Brass adapters for reduced nuts with O-rings in EPDM
Brass male joint with EN 10226 male thread
Brass female joint with EN 10226 female thread
Brass M/M nipples with double ISO 228 G male thread with plane end
Brass M/M/M TEE with ISO 228 G male threads
KLINGERSIL C4324: synthetic fibers plane gaskets for drinking water
EPDM PEROX plane gaskets for drinking water
KLINGERSIL C4324: synthetic fibers reduced plane gaskets for drinking water
Tools and accessories
- All
- Press tools
- Accessories for heat pumps
- XL flanging tools
- Flanging tools
Yellow Heat-Shrink Sheath
Black Adhesive Heat Shrink
Black Heat-Shrink Sheath
E-profile pressing jaw for PLT-CSST tubes from DN 12 to DN 32 and press-fitting system
Kit ePRESS DN 12-15 EN
Kit ePRESS DN 15-20 EN
Brass nuts with special seat and ISO 228 G female thread without gaskets
Reduced brass nuts with special seat and ISO 228 G female thread
Brass adapters for reduced nuts with O-rings in EPDM
Brass male joint with EN 10226 male thread
Brass female joint with EN 10226 female thread
Brass M/M nipples with double ISO 228 G male thread with plane end
Brass M/M/M TEE with ISO 228 G male threads
Stainless steel flanges for PLT-CSST pliable corrugated tubes
KLINGERSIL C4324: synthetic fibers plane gaskets for drinking water
EPDM PEROX plane gaskets for drinking water
KLINGERSIL C4324: synthetic fibers reduced plane gaskets for drinking water
XL ADAPTOR – Automatic flanging tool for PLT-CSST tubes from DN 32 to DN 50
Flanging template “60DB” for PLT-CSST tubes
Starter Kit with manual flanging tool
Starter Kit AdaptorPRESS
Plus Kit EN
Plurima Light Kit EN
Kit Eurowater/Eurosolar EN
Kit AdaptorPRESS EN
REMS-Kit with automatic flanging tool for PLT-CSST tubes
ADAPTOR – Automatic flanging tool for PLT-CSST tubes from DN 10 to DN 25
Manual flanging tool “60 DB” for Eurotis PLT-CSST tubes
