Flanging system
The flanging system, widely used in the hydro-thermo-sanitary sector, is the Eurotis system which, thanks to the company, has made the history of the PLT-CSST tube.
HIGH RESISTANCE
The mechanical seal, tube / fitting, takes place thanks to the compression of the last two corrugations of the PLT-CSST tube, this procedure creates a flat ledge called flange. Thanks also to the thickness of the Eurotis tube, equal to 0.3 mm, the mechanical seal is ensured by the folder of the corrugations which generates a flange with considerable resistance.
FOR SMALL AND MEDIUM INSTALLATION
The Eurotis flanging system has been designed and developed for pipes of different diameters, from DN 10 to DN 50, to satisfy all plant requirements.
EASY TO INSTALL
To carry out the flanging of the PLT-CSST pipes, Eurotis provides the installer with three equipment: automatic, manual or semi-automatic AdaptorPRESS.
The AdaptorPRESS, a Eurotis patent and the first and only semi-automatic flanging tool compatible with all standard (not mini) pressing machines, while, the manual tool can be used on pipes from DN 10 to DN 25. To make the flange, independently of the Eurotis equipment that is used, the special templates for the different diameters must be used.
HIDRAULIC SEAL
The hydraulic seal is guaranteed by different types of flat gaskets: Klingersil, Afm34, Centellen, EPDM, Graphite for water and solar and NBR for gas. Furthermore, the system nuts are built with a special seat that optimizes the seal.
TOTAL PASSAGE SYSTEMS
All our systems are total passage systems.
The flanging system, widely used in the hydro-thermo-sanitary sector, is the Eurotis system which, thanks to the company, has made the history of the PLT-CSST tube.
HIGH RESISTANCE
The mechanical seal, tube / fitting, takes place thanks to the compression of the last two corrugations of the PLT-CSST tube, this procedure creates a flat ledge called flange. Thanks also to the thickness of the Eurotis tube, equal to 0.3 mm, the mechanical seal is ensured by the folder of the corrugations which generates a flange with considerable resistance.
FOR SMALL AND MEDIUM INSTALLATION
The Eurotis flanging system has been designed and developed for pipes of different diameters, from DN 10 to DN 50, to satisfy all plant requirements.
EASY TO INSTALL
To carry out the flanging of the PLT-CSST pipes, Eurotis provides the installer with three equipment: automatic, manual or semi-automatic AdaptorPRESS.
The AdaptorPRESS, a Eurotis patent and the first and only semi-automatic flanging tool compatible with all standard (not mini) pressing machines, while, the manual tool can be used on pipes from DN 10 to DN 25. To make the flange, independently of the Eurotis equipment that is used, the special templates for the different diameters must be used.
HIDRAULIC SEAL
The hydraulic seal is guaranteed by different types of flat gaskets: Klingersil, Afm34, Centellen, EPDM, Graphite for water and solar and NBR for gas. Furthermore, the system nuts are built with a special seat that optimizes the seal.
TOTAL PASSAGE SYSTEMS
All our systems are total passage systems.
PRODUCTS
- All
- Flanging tools
- Gas flanging system
- Heat pumps flanging system
- Solar flanging system
- Water flanging system
Nickel plated brass nuts with special seat and ISO 228 G female
Brass junction simple screws
Nickel plated brass nuts with special seat and ISO 228 G female thread with synthetic fibers based KLINGERSIL C4324
Nickel plated brass nuts with special seat and ISO 228 G female thread with NBR plane gaskets
Nickel plated brass reduced nuts with special seat and ISO 228 G female thread with arammidic fibers based CENTELLEN WS 3820 plane gaskets
Reduced nickel plated brass nuts with special seat and ISO 228 G female thread with NBR plane gaskets for gas
Nickel plated brass M/M nipples with double ISO 228 G male thread with plane end
Brass M/M nipples with double ISO 228 G male thread with plane end
Nickel plated brass M/M nipples with double ISO 228 G male thread with plane end (A) and EN 10226 R male taper thread (B)
Brass M/M nipples with double ISO 228 G male thread with plane (A) end and EN 10226 R male taper thread (B)
Nickel plated brass M/F nipples with ISO 228 G male thread with plane end and EN 10226 Rp female thread
Brass M/F nipples with ISO 228 G male thread with plane end and EN 10226 Rp female thread.
Brass M/M reduced nipples with double ISO 228 G male thread with plane end (A-B)
Brass M/M reduced nipples with ISO 228 G male thread with plane end (B) and EN 10226 R male taper thread (A)
Brass M/F reduced nipples with ISO 228 G male thread with plane end (A) and EN 10226 Rp female thread (B)
Brass M/F reduced nipples with ISO 228 G male thread with plane end and EN 10226 Rp female thread
Brass M/M fittings for junction between flanged PLT-CSST tubes and copper tubes ends
Nickel plated brass M/M/M tee with ISO 228 G male threads (A-B-C)
Brass M/M/M tee with ISO 228 G male threads (A-B-C)
Nickel plated brass two ways linear manifolds with ISO 228 G male threads
Nickel plated brass three ways linear manifolds with ISO 228 G male threads
Nickel plated brass 90° M/F elbows with a ISO 228 G male thread with plane end (A) and a ISO 228 G female thread (B)
Nickel plated brass 90° elbows with ISO 228 G male thread with plane end (A) and ISO 228 G male thread with seat for De14 copper tube (B)
Nickel plated brass M/F wall elbows with ISO 228 G male thread with plane end (B) and ISO 228 G female thread
Starter Kit with manual flanging tool
Starter Kit AdaptorPRESS
Plus Kit EN
Plurima Light Kit EN
Kit Eurowater/Eurosolar EN
Kit AdaptorPRESS EN
REMS-Kit with automatic flanging tool for PLT-CSST tubes
ADAPTOR – Automatic flanging tool for PLT-CSST tubes from DN 10 to DN 25
Manual flanging tool “60 DB” for Eurotis PLT-CSST tubes
