EUROSOLAR

NEW SOLAR-PRESS

AISI 304 stainless steel PLT-CSST tubes Solar-PRESS lines with insulation for thermal solar installations with or without electric cable

SOLAR-PRESS lines are composed by PLT-CSST tube in AISI 304, thickness 0,3 mm with red color low thickness thermal insulation in expanded polyurethaneand covered with red roof color mechanical ware and UV protective film.

Mono SOLAR-PRESS tubes are available without the electric cable.

SOLAR-PRESS tubes are coupled and can be separated easily. This tube can be handly bended to make easier the laying of the line both inside and outside the buildings.
The electric multipolar cable is included in one of the tube for an immediate identification of delivery and return of the plant.

Main features:

  1. Red roof external protective coating
  2. Low thickness flexible polyurethane foam with high insulating capacity
  3. Stainless steel PLT-CSST pliable corrugated tube
  4. Multiphase electric cable
  • PN (Nominal pressure): 15 bar
  • Tmax (continuous): 150°C
  • Tmin (short peak temperature): 175°C
  • Tmin: -50°C
  • Thermal conductivity: 0,030 W/mK
AISI 304 stainless steel PLT-CSST tubes MONO-SUN-SET and TWIN-SOLAR-SET lines with thermal insulation for thermal solar installations with or without electric cable

MONO-SUN-SET and TWIN-SOLAR-SET lines are composed by PLT-CSST tube in AISI 304, thickness 0,3 mm with EPDM closed cell structure insulation coating and covered with mechanical ware and UV protective film.

MONO-SUN-SET tubes are avaiable with or without the electric cable.

TWIN-SOLAR-SET tubes are coupled and can be separated easily. This tube can be handly bended to make easier the laying of the line both inside and outside the buildings. The electric multiphase cable is included in one of the tube for an immediate identification of delivery and return of the plant.

Tubo rivestito epdm csst preisolato solare flessibile formabile spessore 0,3

Main features:

  1. External protective coating
  2. Closed cell EPDM expanded
  3. Stainless steel PLT-CSST pliable corrugated tube
  4. Multiphase electric cable
  • PN (Nominal pressure): 15 bar
  • Tmax (continuous): 150°C
  • Tmin (short peak temperature): 175°C
  • Tmin: -40°C
  • Thermal conductivity:  0,038 W/m K (at 40° C)
  • Reaction to fire class:  EN 13501-1:E / DIN 4102:B2
AISI 304 stainless steel PLT-CSST tubes SOLAR-THIN-POWER line with low thickness thermal insulation for thermal solar installations

SOLAR-THIN-POWER composed by PLT-CSST tube in AISI 304, thickness 0,3 mm, preinsulated with a special formulation of flexible expanded polyurethane that makes the tube suitable for continuous operative temperature up to 150°C.

The thermal insulation is covered by an aluminium layer (very high resistance to the water vapour diffusion with the consequent maintenance of the thermal insulation characteristics for the limited tendency to condensation when the temperature of the supplied fluid is at the dew point of the air in the outside environment) that is in turn covered by a film high protective from UV rays and mechanical wears.

SOLAR-THIN-POWER tubes are coupled and can be separated easily. This tube can be handly bended to make easier the laying of the line both inside and outside the buildings. The electric multiphase cable is included in one of the tube for an immediate identification of delivery and return of the plant.

SOLAR-THIN-POWER is avaiable also as single tube with or without multiphase cable.

Thanks to the lower thermal conductivity (λ = 0,030 W/m K) of the flexible expanded polyurethane used as insulating material in the SOLARTHINPOWER tubes by Eurotis, it is possible to reduce the thickness of the insulation to 8 mm compared to the value of 13 mm of the traditional insulating materials such as expanded EPDM or NBR while retaining the same thermal resistance (that is the ability to limit the heat losses that reduce the energetic efficiency of the system). Thus it is possible to reduce size encumbrances, facilitating transport, handling and installation even for high lengths of the coils.

Tubo rivestitopoliuretano corrugato csst preisolato solare flessibile formabile spessore 0,3

Main features:

  1. External protective coating
  2. Aluminium layer (no condensation)
  3. Flexible expanded polyurethane
  4. Stainless steel CSST pliable corrugated tube
  5. Multiphase electric cable
  • PN (Nominal Pressure): 15 bar
  • Tmax (continuous): 150°C
  • Tmin (short peak temperature): 175°C
  • Tmin: -50°C
  • Thermal conductivity:  0,030 W/m K (at 40° C) EN ISO 8497
Products: